Quick Start Guide; Answering System - Uniden DSS 5855 series Owner's Manual

Step 1 Charging the Battery
INSTALL THE HANDSET BATTERY
Remove the cover.
Plug in the battery
pack connector to
the socket.
Make sure the RED and BLACK wires
match the RED and BLACK
engraving on the phone cace.
Replace the cover.
PLUG INTO AC POWER
Plug the AC adapter cord into
the base unit and then to
a standard AC outlet.
Place the handset in the base.
You must charge the battery pack
Note: continuously for 15-20 hours
before using the phone.
Step 2 Connecting
CONNECT TO A PHONE LINE
When the handset battery pack is fully
charged, plug the telephone cord into
the base unit and then into a telephone
socket on the wall.
Step 3 Making and Receiving a Call
MAKE A CALL
Pick up the handset and press
.
talk/flash
Dial the phone number.
OR
Dial the phone number then press
.
talk/flash
To hang up, press , or place the
end
handset on the base.
ANSWER A CALL
Handset on the base:
Remove the handset from the base,
or remove the handset from the base
and press .
talk/flash
Handset off the base:
Press any number key, or
/tone #
*
(Any key Answer), or press
and speak.
talk/flash
Hands - free:
Pick up the handset, press and
spkr
speak.
Speaker Phone:
Press (Talk) on the base and
speak.
To hang up, press , or place the
end
handset on the base.
To hang up Speaker Phone on the
base, press (Talk).
Q U I C K S T A R T G U I D E
Step 4 Setting up

Answering System

TURN THE ANSWERING
SYSTEM ON/OFF
Each time is pressed, the
answer on/off
answer mode is switched between On and
Off.
SET GREETING MESSAGE
Press and hold until you
greeting
have an announcement.
Release .
greeting
Start recording your message.
Position yourself as near to the base
as possible.
When finished, press or
greeting
.
[ 1 ]