Safety Messages In Display - Alba PT-450 User Manual

Rack and pinion transport platform PT-450
3.4. . Security messages on the display.
IMPORTANT:
DURING THE OPERATION OF THE HOIST, TWO TYPES OF SAFETY MESSAGES CAN BE
· MESSAGES "SECU": THE HOIST REMAINS OPERATIONAL IF IT WILL BE SAID FROM
· MESSAGES "STOP": REQUIRES THE ACTION OF AN AUTHORIZED TECHNICIAN TO
"STOP" MESSAGES (ACTION BY AN AUTHORIZED AND COMPETENT TECHNICIAN)
.
(FCB): Inferior Endtrack Reference point for hoist movements.
IMPORTANT:
IN CASE OF SHOWING "STOP" MESSAGE, YOU MUST GO TO "MANUAL" MODE,
AND FOLLOW THE INDICATIONS OF THE TABLE, UNTIL THE DISPLAY MARK
"RSET" (RESET), TURN OFF THE ELEVATOR TO THE REFERENCE POINT (FCB) AND
PRESS THE RESET BUTTON (KEY).
©
ALBA-MACREL GROUP, S.L.
RECEIVED IN THE DISPLAY:
THE CAUSE OF THE SAFETY MESSAGE.
RESOLVE THE PROBLEM AND REACT THE CONTROL.
"SECU" MESSAGES (ACTION OF AN HOIST USER)
LED
OVERLOAD
Kg
AUXILIARY CRANE
STOP
CAGE DOORS
INT
LANDING DOORS
EXT
LED
?
PARACHUTE
!
NO MAST
STOP
ENDTRACK UP
MOTOR
NORMAL MESSAGES
ENDTRACK DOWN
STOP
2 m
OK
HOIST FREE
HOIST BUSY
PERSONS
MAN Resolve warning - Resume operation
AUTO Resolve notice - Press RUN
1) Press UPWARDS until display shows REST
MAN
2)
Press DOWNWARDS until Ref. point (FCB)
AUTO Turn key to MAN
1) Press DOWNWARDS until display shows REST
MAN
2)
Press DOWNWARDS until Ref. point (FCB)
AUTO Turn key to MAN
1) Press DOWNWARDS until display shows REST
MAN
2 Press DOWNWARDS until Ref. point (FCB)
AUTO Turn key to MAN
1) Resume relay (RT1,RT2), display shows REST
MAN
TEMP
2)
Press DOWNWARDS until Ref. point (FCB)
AUTO Turn key to MAN
DESCEND to lower endtrack limit
AUTO/MAN
FAULT
Check rectifier and rearm E4
1)
BRAKE
SAT
2) Press KEY.
Ref. point platform (FCB)
2 m.
2 m. safety zone platform
ZONE
Platform stopped and prepared
Platform moving or busy
Control inside cage activated
USER´S MANUAL
PROCEDURE
PROCEDURE
Call Tech. service.
display shows RESET
Pag. 41
Press KEY
Press KEY
Press KEY
Press KEY