Dismantling The Hoist - Alba PT-450 User Manual

Rack and pinion transport platform PT-450
Step 14. Assembly of the falling object protection
IMPORTANT NOTE:
ACCORDING TO THE STANDARD AT 16719: 2019, THE PLATFORM MUST BE
EQUIPPED WITH AN FALLING OBJECTS PROTECTION. THE CEILING CAN BE
REMOVABLE FOR ASSEMBLY AND MAINTENANCE TASKS, BUT ONLY WITH A
SPECIFIC RISK ANALYSIS IN THE PLACE OF INSTALLATION, WHICH CONCLUDES
THAT THE RISK OF FALLING OF OBJECTS THAT CAN DAMAGE PEOPLE ON THE
PLATFORM IS MINIMUM, THE PLATFORM OF TRANSPORTATION COULD BE USED
WITHOUT CEILING.
ALBA SUPPLIES THE PROTECTOR WITH THE MACHINE, AND THEREFORE IT IS THE
RESPONSIBILITY OF THE INSTALLER TO PREPARE THE RISK ANALYSIS AND, IF
APPLICABLE, THE USE OF THE PLATFORM BY THE WORKERS WITHOUT THE
FALLING OBJECTS PROTECTION.
39 Kg
FALLING OBJECT PROTECTION

2.4. Dismantling the hoist

For the dismantling of elevator perform the reverse process to that described in this manual, with
particular attention to the tasks that present a risk of falling.
ATTENTION:
FOR MACHINE DISMANTLING "MANUAL" MODE IS TO BE USED, WITHOUT LOADS,
AND OPERATING THE HOIST FROM CAGE CONTROL.
Step 1. Dismantling mast column and anchorages
Remove first the red Mast and upper stop cam and then the column of masts and anchors.
©
ALBA-MACREL GROUP, S.L.
USER´S MANUAL
ASSEMBLY OF THE PROTECTOR
Pag. 33