Table of Contents
Advertisement
MC250
floors for lifting or lowering materials and persons in a fast and safe way. Below, please find
the main points to bear in mind prior to erection and use of the machine.
The hoist is designed for transsporting only loads. It can be used for transporting
materials during building construction, and also for hoisting scaffolding components
for assembling scaffold structures.
The machine runs vertically, geared to the mast rack and guided with support rollers.
Loading and unloading operations must be carried out by trained personnel.
Machine operation must be carried out by appointed personnel trained in hoist
operation.
The machine is designed to be fixed at suitable intervals to a load‐bearing structure,
mainly a scaffolding structure, or also the floor slabs of a construction site, a metal
structure, or similar. ALBA‐MACREL GROUP, S.L. includes in the machine manual all the
information related to the loads transmitted to the vertical support structure and to
the ground. It is the responsibility of the technicians at the installation site to ensure
that both the support structure and the ground support the loads indicated by the
manufacture.
WARNING SYMBOLS:
WARNING:
MAIN SAFETY INSTRUCTION DURING INSTALLATION OR OPERATION IS TO BE
ENTERED IN TEXT BOXES LIKE THIS, INCLUDING WARNING SYMBOL (LEFT).
1.3. Technical data and safety systems
Dimensions
Standard carrier
Maximum capacity
Dimensions
Carrier
for
scaffold parts
Maximum capacity
Vertical speed
Motor
Maximum height
Distance between anchorages (max.)
First anchorage (aprox.)
Noisse emission value
(+34) 944 71 16 00 (+34) 944 53 17 54 export@alba.es
MC250 Rev.02-USA
900 x 500 x 900mm
250kg
900 x 500 x 1800mm 35.43 x 19.68 x 70.86 in
250kg
20 m/min (65 ft/min)
3 phase 1,5kW 230V 50/60Hz
30m (98 ft 5.1 in)
3m (9 ft 10.11 in)
1m (3 ft 3.37 in)
> 70dB
page
35.43 x 19.68 x 35.43 in
550 lb
550 lb
www.alba.es
4 of 78
Advertisement
Table of Contents
