Auto Mode - Selector "Only Loads - Alba PT-450 User Manual

Rack and pinion transport platform PT-450
· AUTO MODE – "ONLY LOADS" SELECTOR (ALL MODELS):
DESCRIPTION OF CONTROLS – AUTO MODE-"ONLY LOADS" (GROUND PANEL)
AUTO MODE WITH HOIST
IN THE POINT OF REFERENCE
AUTO MODE WITH HOIST OUT OF
THE POINT OF REFERENCE .
LIGHT - OUT OF SERVICE
MODE "SOLO CARGAS"
(ON CAGE)
SELECTION OF DESTINATION
FLOOR BUTTONS
SHIP TO DESTINATION FLOOR
ATTENTION: MODEL PT-450-2V
WHEN "AUTO" MODE IS SELECTED, PERSONS USE (CAGE) OR LOADS USE
(GROUND) HAVE TO BE CHOSEN.
ANY EXCHANGE PERSONS - LOADS SELECTOR WHEN THE PLATFORM IS IN
MOVEMENT, IS EFFECTIVE ONLY AFTER FINISHING THE CURRENT MOVEMENT.
ATTENTION: (ONLY MODEL PT-450-1V)
TO ENABLE CAGE CONTROL "KEY" BUTTON´S TO BE PRESSED. HOIST CONTROL
FROM CAGE (PERSONS) IS ALLOWED FOR 15 SEC, ANNULLING GROUND PANEL.
AFTER 15 SEC. WITHOUT ORDER FROM CAGE CONTROL, CONTROL RETURNS TO
GROUND PANEL.
Pag. 40
ATENCION:
THE MOTION TO THE FLOOR DESTINATION OF
THE HOIST IN AUTO MODE – "ONLY LOADS"
WILL BE AUTOMATIC AFTER PULSING "RUN",
AND AT NOMINAL SPEED.
USER´S MANUAL
Rev.1.0