Table of Contents
Advertisement
•
After the pyrolytic cleaning, wait for the equipment to cool down and clean it with hot soapsuds
and a damp cloth.
INFORMATION!
For better cleaning results, we recommend cleaning the oven and the accessories/equipment
separately. When using the pyrolytic cleaning process to clean the equipment, the oven cavity
may not be completely clean at the end of the cycle.
If you are not happy with the cleaning results, we recommend repeating the process.
As a result of the automatic pyrolytic cleaning, the oven cavity and the oven accessories may
discolour and lose their sheen. This does not affect the functionality of the oven or the
accessories/equipment.
11.2 Cleaning the evaporator tray
WARNING!
After use, the evaporator tray can be hot, and there can still be some water in it. To avoid
scalding, wait for the oven to cool down completely.
Remove the tray and manually clean the evaporating tray with a hand washing up liquid or in the
dishwasher. If there are limescale deposits in the tray, soak it in limescale remover (use the limescale
remover according to the instructions provided by its manufacturer) or in spirit vinegar. After cleaning
and before replacing it, thoroughly rinse the tray.
1.
The evaporator tray is attached on the right-hand side between the upper heaters.
2.
Push the evaporator tray lever slightly to the back (by approximately 2 cm) to unlatch the tray.
3.
Clean the evaporator tray with water and detergents.
4.
Before using the oven again, replace the evaporator tray. Attach the tray to the bent parts or
wires of the heater and pull towards yourself until it clicks into place (you will feel somewhat
stronger resistance).
NOTE: If the tray is not replaced, then water will drip on the food when baking with steam
injection.
INFORMATION!
Due to its position close to the heaters, the evaporating tray could discolour. This does not affect
its function or usability.
40
Advertisement
Table of Contents
