Table of Contents
Advertisement
Table continued from last page
8.
9.
10.
11.
12.
To exit the general settings menu, touch
Sabbath
The Sabbath function allows the food in the oven to stay warm
without having to turn the oven on and off.
Select the setting SAbb.
Set operation duration (between 24 and 72 hours) and
temperature. When you touch
The display will show SAbb.
All sounds and operations are switched off except for the
key
.
NOTE: In case of a power outage, Sabbath mode will be
deactivated and the oven will return to its initial state.
Factory default settings
This function allows the appliance to be reset to factory
settings. The display will show FAct. Press
enough for the line under the inscription to light up completely.
Water hardness
You can choose between five water hardness levels. The
default setting is level 5.
Whr 1 means water with the lowest hardness.
Whr 5 means water with the highest hardness.
Emptying the water tank
This function allows the water tank to be emptied after cooking
has finished in cases where you have used the addition of
steam during cooking. The display will show UnFiL. Select
and confirm No to exit the setting.
To drain the water from the tank, first remove the food from
the oven. Insert the baking tray on the 5th level. On the display,
select and confirm YES. The process of emptying the water
tank will begin. When the process is complete, remove the
baking tray of water from the oven and wipe the oven dry.
Descaling
You can activate the descaling function yourself or it will be
suggested by the oven after a certain number of cycles of
using the steam function (the display shows dEcL).
To turn on the function, select YES, and to turn it off select
OFF (see chapter 11.3 Cleaning the steam system).
.
, the countdown begins.
for long
25
Advertisement
Table of Contents
