Table of Contents
Advertisement
11.3 Cleaning the steam system
Cleaning depends on how often you use the steam injection function and on the hardness of the water
used.
1.
Insert the all-purpose deep baking tray into the 5th (top) guide level to allow the water drip into
it.
2.
From the general settings menu, select descaling (dEcL). To turn on the function, select Yes.
To start the procedure, touch
3.
The display will show Fill.
Fill the tank with descaler and once again touch
4.
Descaling in progress.
5.
When the process is complete, the display will once again show Fill. Pour fresh rinse water
into the tank and touch
6.
After the rinsing process, End will appear on the display unit.
7.
Remove the baking tray with water from the oven and wipe the oven dry if necessary.
INFORMATION!
If you do not want to perform the cleaning of the steam system when the oven prompts you to,
you can interrupt this by touching
the oven will disable the steam function.
. The descaling process is activated and cannot be cancelled.
.
. Cleaning can be cancelled up to three times, after which
.
41
Advertisement
Table of Contents
