Table of Contents
Advertisement
Cleaning the evaporator tray
WARNING!
After use, the evaporator tray can be hot, and there can still be some water in it. To avoid
scalding, wait for the oven to cool down completely.
Remove the tray and manually clean the evaporating tray with a hand washing up liquid or in the
dishwasher. If there are limescale deposits in the tray, soak it in limescale remover (use the limescale
remover according to the instructions provided by its manufacturer) or in spirit vinegar. After cleaning
and before replacing it, thoroughly rinse the tray.
32
1
The evaporator tray is attached on the
right-hand side between the upper heaters.
2
Push the evaporator tray lever slightly to
the back (by approximately 2 cm) to unlatch
the tray.
3
Clean the evaporator tray with water and
detergents.
4
Before using the oven again, replace the
evaporator tray. Attach the tray to the bent
parts or wires of the heater and pull towards
yourself until it clicks into place (you will feel
somewhat stronger resistance).
NOTE: If the tray is not replaced, then water
will drip on the food when baking with steam
injection.
INFORMATION!
Due to its position close to the heaters,
the evaporating tray could discolour. This
does not affect its function or usability.
Advertisement
Table of Contents
