Uninstalling A U.s. Robotics ® Modem; Uninstalling A Winmodem Modem - US Robotics USR5610B User Manual

3
Uninstalling a
Winmodem modem
U
NINSTALLING A
R
OBOTICS
NOTE: These instructions only apply to current U.S. Robotics modems. If
the modem you'll be uninstalling was made by another manufacturer,
refer to that modem's documentation for instructions.
This chapter covers the uninstallation of:
A U.S. Robotics Winmodem
A U.S. Robotics Internal Faxmodem.
A U.S. Robotics External Faxmodem.
A U.S. Robotics Macintosh Faxmodem.
(Model Numbers 3CP5699A, 3CPxx5699A, 3CPxx2884A, 3CP5695, and
3CPxx5695)
1 Click Start, point to Settings and then click Control Panel.
2 Double-click the Add/Remove Programs icon.
3 Scroll down, select your modem and click Add/Remove.
4 A reminder that your U.S. Robotics modem will be permanently removed
from your system appears. Click Remove to proceed.
5 Click OK to confirm that the modem has been removed from your
system.
6 Next, verify that you completely uninstalled the Winmodem software.
Click Start, point to Settings and select Control Panel.
7 Double-click the System icon and click the Device Manager tab. If you
do not see a modem icon, you've successfully uninstalled your
Winmodem software. If you do see an icon, repeat these instructions
beginning with Step 1.
U.S.
M
ODEM
®
® modem.