Uninstalling A Winmodem Modem - US Robotics 3CP5613 User Manual

NOTE:
These instructions only apply to current U.S.
Robotics modems. If the modem you'll be uninstalling
was made by another manufacturer, refer to that
modem's documentation for uninstall instructions.
To Uninstall
®
A Winmodem Modem, see page 5-1.
An Internal Faxmodem, see page 5-2.
An External Faxmodem, see page 5-2.

Uninstalling a Winmodem Modem

1. First, remove the Winmodem software from the Windows
operating system. From the Start menu, point to Settings
and then click Control Panel.
2. Double-click the System icon.
3. Select Device Manager.
4. Double-click Modems.
5. Select Winmodem.
6. Click Properties.
7. Choose the Port Settings tab and then click the Uninstall
button.
U
NINSTALLING A
U.S. R
OBOTICS
8. Windows displays the following message: "Warning, you
are about to remove this device from your system." Click
OK. The Winmodem is now uninstalled from your system.
9. Next, verify that you completely uninstalled the Winmodem
software. Click Start, point to Settings and select Control
Panel.
10. Double-click the System icon and click the Device
Manager tab. If you do not see a modem icon, you've
successfully uninstalled your Winmodem software. If you do
see an icon, repeat these instructions beginning with Step 1.
11. Shut down Windows.
12. Remove the phone cords from the modem's TELCO (or
) and PHONE (or
modem, remove any microphones or powered speakers
attached to the modem.
.
M
ODEM
) jacks. If the modem is a voice
5-1