Step 9. Print A Test Pattern - Pitney Bowes DM100i Quick Install Manual

Step 9. Print a Test Pattern

When prompted, insert a spare envelope
or a tape sheet for a test print.
Registration
Wall
Good test print - no missing lines
If the test print is good, press the green Yes/Enter
button on the front of the meter.
Yes/Enter
No
If the test print is poor, press No to perform
additional maintenance.
Poor test print
i
For proper printing,
position mail flat
against registration
wall and gently slide
mail to the right on
feed deck.
The system will
detect the envelope
and automatically
pull it through the
printing mechanism.
9