Input And Output Settings For Video And Audio Signals (Submenu) - Sony Betacam SX DNW-A28 Operation Manual

2-8 Input and Output Settings for Video and Audio
Signals (Submenu)
Using the submenu, you can make channel settings and
adjust the input and output characteristics of video and
audio signals.
For more information about basic submenu operations, see
section 2-7-2 "Submenu Basic Operations".
2-8-1 Making Settings in the
Audio Settings Pages
The audio settings pages are divided into four groups,
AU-1 to AU-4. To call up one of the settings pages in
a group, select the group from the home page. Each
settings page has a number that indicates its group and
its position within the group. For example, audio
settings page 1-1 is the first page in group AU-1.
Audio settings page 1-1
AUDIO INPUT
IN-1 IN-2
SDI-1 SDI-2
AGC
OFF
Item Setting
AUDIO Select the signals of audio input channels 1
INPUT to 4
IN-1 SDI-1 or ANALOG 1
IN-2 SDI-2 or ANALOG 2
IN-3 SDI-3 or ANALOG 1
IN-4 SDI-4 or ANALOG 2
AGC Turn the audio input AGC circuits ON and
OFF (enabled when the REC/PB audio level
PRE/VAR switch
LIMITER Turn the audio input limiter circuits ON and
OFF (enabled when the REC/PB audio level
PRE/VAR switch
MAIN VR Toggle the functions of the REC/PB audio
level main adjustment knobs and the REC/
PB audio level subadjustment knobs.
REC: Adjust the recording level with the
REC/PB audio level main adjustment knobs.
PB: Adjust the playback level with the REC/
PB audio level main adjustment knobs.
a) The switch for the main adjustment knobs when MAIN
VR is set to REC, and the switch for the subadjustment
knobs when MAIN VR is set to PB
2-20
Chapter 2 Preparations
[AU-1-1]
IN-3 IN-4
SDI-3 SDI-4
LIMITER MAIN VR
OFF PB
a)
is set to PRE).
a) is set to VAR).
To switch to audio settings page 1-2
Press the PAGE button.
Audio settings page 1-2
CH MIX/SWAP
2 IN-1
1*IN-1
IN-2 *IN-2
IN-3 IN-3
IN-4 IN-4
Item
Setting
MIX/SWAP Select up to two audio input signals (IN-1 to
CH 1 to 4 IN-4) to be assigned to channels 1 to 4.
When two signals are selected, they are
mixed.
To select
Select the channel using operation buttons
F1 to F4, and press the MARK/UP or LIST/
DOWN button to add asterisks to the position
of the desired input signal.
To switch to audio settings page 1-3
Press the PAGE button.
Audio settings page 1-3
LINE OUT MONITOR
CH-1/2 FIX
EMPH DOLBY
OFF
OFF
[AU-1-2]
3 IN-1 4 IN-1
IN-2 IN-2
*IN-3 IN-3
IN-4 *IN-4
MONITOR [AU-1-3]
*
L CH-1 R CH-1
CH-2 * CH-2
CH-3 CH-3
CH-4 CH-4