Table of Contents
Advertisement
mn ee
w
2-1 2(E)
| Chapter 2 Location and Function of Parts and Controls
Rear Panel (Continued)
wd
(2)
on
VIDEO IN(input) connectors (BNC type)
and 75 Q termination switch
Used to input a composite video signal. Bridge
connection is allowed. To set a bridge
connection, set the 75 Q termination switch to
OFF. For the last unit of a bridge connection or
for no bridge connection, set the 75 Q
termination switch to ON.
S VIDEO IN(input) connector (4-pin mini
DIN)
To input the Y and C signals separately.
SYNC IN(synchronizing signal input)
connector (BNC type)
Used to input an external synchronizing signal.
AUDIO OUT(output) connectors
@ AUDIO OUT NORMHi-Fi CH-1/L
and CH-2/R connectors
© AUDIO OUT Hi-Fi CH-1/L
and CH-2/R connectors
AUDIO OUT connectors
@ AUDIO OUT(output) NORM/Hi-Fi CH-
1/L(channel 1/left) and CH-2/R(channel
2/right) connectors (phono jacks)
Used to output the hi-fi recording or normal
recording audio output signals, selected with
the AUDIO LINE OUT SELECT switch on the
sub panel.
© AUDIO OUT(output) Hi-Fi CH-
1/L(channel 1/left) and CH-2/R(channel
2/right) connectors (phono jacks)
Used to output the hi-fi recording audio output
signal.
for)
7]
~~
Optional accessory compartment (1)
This compartment is used to install the SVBK-
100 or SVBK-120.
Nothing can be installed here when optional
accessory compartment (2) [7] is being used.
Optional accessory compartment (2)
This compartment is used to install the SVBK-
130 or SVBK-140.
Nothing can be installed here when optional
accessory compartment (1) [6] is being used.
[8] AUDIO MONITOR output connector
(phono jack)
Used to output the audio signal selected with
the MONITOR OUT CH-1/MIX/CH-2 selector
on the front panel.
[9] TV OUT (output) connector (8-pin)
fs
|
S
Used to output the video and audio signal toa
video monitor having an 8-pin VTR connector.
The audio signal recorded onto the channel
selected with the MONITOR OUT selector is
output.
S VIDEO OUT (output) connector (4-pin
mini DIN)
Used to output the Y and C signals separately.
VIDEO OUT (output) connector (BNC
type)
Used to output a composite video signal.
AC IN(input) connector and ground
terminal
@ ~ACIN
AC IN connector and ground terminal
@ ~ AC IN: Used to connect the VTR to an
AC power outlet with the supplied AC power
cord.
© x (ground) terminal: Used to connect a
ground line.
TUTTE
Advertisement
Table of Contents
