MTP61
multi-band miniature transmitter
COMPLIANCE
Model
MTP61-EU
MTP61-EUX*
MTP61-US
MTP61-CA
The model "MTP61-xx" and conformity logos are shown on the external label and can be checked
in the menu Info > STD (regulation standard).
Before putting the device into operation, please bserve the respective country-specific regu-
lations!
* MTP61-EUX is not an SRD device, thus it requires specific authorization by your local frequency authority!
SAFETY INSTRUCTION
•
Read this safety instruction and the manual first
•
Follow all instructions and information.
•
Do not lose this manual.
•
Do not use this apparatus under the rain or near the water.
•
Do not install the apparatus near heaters or in hot environments, do not use outside the
operating temperature range.
•
Do not open the apparatus, only qualified service technician are enabled to operate on it.
The apparatus needs servicing when it is not properly working or is damaged by liquids,
moisture or other objects are fallen in the apparatus.
•
Use only accessories or replacement parts authorized or specified by the manufacturer.
•
Clean the apparatus only with dry cloths, do not use liquids.
•
Report the serial number and the purchasing date in front of the manual. It is needed to
have proper replacement parts or accessories from the manufacturer.
•
When replacement parts are needed, use only replacement parts authorized from the man-
ufacturer. Substitution with not authorized parts could result in electric shock, hazards or
fire.
•
Keep attention on all the labels with warnings or hazards on the apparatus.
In compliance with
EN 301 489-1/-9
EN 600065
EN 300 422-1/-2
EN 301 489-1/-9
EN 600065
EN 300 422-1/-2
EN 300 454-1/-2
FCC PART 74
FCC-ID: POUMTP61
RSS-123, RSS-102
IC:11967A-MTP61
Range and max power
470-832 MHz max 50 mW
470-832 MHz max 100 mW
470-608 MHz max 100 mW
614-663 MHz max 20 mW
940-960 MHz max 100 mW
470-608 MHz max 100 mW
614-663 MHz max 20 mW
940-960 MHz max 100 mW
Country
Europe
Europe
USA
Canada
17
Need help?
Do you have a question about the MTP61 and is the answer not in the manual?