Alienware AW3225QF User Manual page 72

When you set Preset Modes to FPS, MOBA/RTS, or SPORTS for the first time,
the following message appears:
NOTE: If you select No, the Brightness level will be changed to 75% for
these Preset Modes.
When you change the default setting of power saving features for the first time,
such as Smart HDR, USB Charging, or Fast Wakeup, the following message
appears:
NOTE: If you select Yes for either of the features mentioned above, the
message will not appear the next time you change the settings of these
features. When you perform a factory reset, the message will appear
again.
When the monitor goes into Standby mode, the following message appears:
NOTE: The message may be slightly different according to the selected
input signal.
Activate the computer and wake up the monitor to gain access to the OSD.
72 | Operating the monitor