Alienware AW3225QF User Manual page 53

Icon Menu and
submenu
Input Source
DP
HDMI 1
HDMI 2
Auto Select
Options for
DP/HDMI
Reset Input
Source
Use this menu to select between the different video
signals that may be connected to your monitor.
Select the DP input when you are using the DisplayPort
(DP) connector. Press the joystick to confirm the
selection.
Select the HDMI 1 or HDMI 2 input when you are using
the HDMI connector. Press the joystick to confirm the
selection.
Automatically scans for available input sources. Press the
joystick to confirm the selection.
Allows you to set this feature to:
• Prompt for Multiple Inputs: Always displays the
"Switch to DP/HDMI Video Input" message for you
to choose whether to switch or not.
• Always Switch: Always switches to DP/HDMI video
input (without asking) when the DisplayPort or HDMI
cable is connected.
• Off: Never automatically switches to DP/HDMI
video input when the DisplayPort or HDMI cable is
connected.
Press the joystick to confirm the selection.
NOTE: This feature is disabled when Auto Select
is set to Off.
Resets all settings under the Input Source menu to the
factory defaults.
Description
Operating the monitor | 53