Table of Contents
Advertisement
6.5
Wire rope deflection
Wire rope pulleys must be installed in a
position centrically to the rope drum.
In order to ensure correct winding up of the
wire rope on the drum, the max. wire rope
deflection angle must not be exceeded.
maximum wire rope deflection angle
4° for standard wire ropes
2° for non-twisting resp. twist-resistant wire
ropes
The minimum dimension (M) from the drum
until the middle of the pulley must be adhered
to.
NOTICE!
Should the drum be extended and for some models with limit switch, the distance "M" must be increased.
Standard values:
15 x 1/2 drum length for standard wire ropes
30 x 1/2 drum length for twist-resistant or non-twisting wire ropes
6.5.1
Wire rope pulley (provided by the customer)
Table dimension "M" for standard drum length
Capacity
"M" min
kg
m
125
0.97
250
1.08
500
1.04
990
1.45
1000
1.45
2000
1.45
3200
1.85
6.6
Tools
Capacity
Size
125 kg
SW6
125 kg
SW13
250 + 500 kg
SW17
990 + 1000 kg
SW19
2000 + 3000 kg
SW24
diff.
diff.
16
Illustration 9
Tool
Use
rope fixing
clamp disc
winch installation
rope installation
air connections
5.52.289.01.01.04
Advertisement
Table of Contents
