Table of Contents
Advertisement
Quick Links
Installation, Operating and
Maintenance Instructions
Pedestal
108/22-EX
Explosion proof design
II 2G Ex h IIB T4 Gb or
II 2G Ex h IIB T3 Gb or
DANGER!
Not to be used with IIC gases and IIB gases hydrogen sulphide and ethylene oxide and light metal
and shock sensitive dusts.
It is not allowed to use the equipment in area at risk from explosion where gas AND dust does both
exist at the same time!
II 2D Ex h IIIA T135°C Db
II 2D Ex h IIIA T200°C Db
Rev.00 5.52.624.01.01.00
Advertisement
Table of Contents
Related Manuals for HADEF 108/22-EX
Summary of Contents for HADEF 108/22-EX
- Page 1 Installation, Operating and Maintenance Instructions Pedestal 108/22-EX Explosion proof design II 2G Ex h IIB T4 Gb or II 2D Ex h IIIA T135°C Db II 2G Ex h IIB T3 Gb or II 2D Ex h IIIA T200°C Db...
-
Page 2: Table Of Contents
Heinrich de Fries GmbH Heinrich de Fries GmbH, Gauss Str. 20, D-40235 Düsseldorf Heinrich De Fries GmbH will be named HADEF in the following text. Original operating- and maintenance instructions in German language. Translation in other languages is made of the German original. -
Page 3: Information
Failure to follow the instructions of this manual can lead to unpredictable hazards. For any resulting damage or personal injury, HADEF assumes no liability. The unit was designed and built following a risk analysis and careful selection of the harmonized standards that are to be complied with, as well as other technical specifications. -
Page 4: Requirements For The Operating Personnel
Our delivery includes the hoist supplied beginning at its suspension and ending at the load hook and if supplied with control, the control line/hose that leads to the hoist. Further operating material, tools, load attaching devices as well as main energy supply lines must be assembled according to the valid rules and regulations. -
Page 5: Basic Safety Measures
The permissible ambient temperature when operating the devices: Device classification for Type of drive Explosive atmosphere not explosive atmosphere )* )** according to ATEX Manually driven -20°C/+50°C -20°C/+40°C Motor driven -20°C/+40°C -20°C/+40°C ) * At an atmospheric pressure range from 0.8bar to 1.1bar and an oxygen content of approx. 21% ) ** Devices of this category have been specially modified and labeled by the manufacturer DANGER! The ambient temperature range must not be exceeded! -
Page 6: Explosion Protection
Check the grease level of the bearings regularly Exchange friction surfaces in time and (an exception to this are electric units - maintenance of the brakes must only be effected by HADEF). Protect the device from impact, friction, rough handling and moisture. - Page 7 Example of ATEX classification: European Union CE-marking explosion-proof operating material danger of mine damp device group / application other areas prone to explosion for use in zone 0 device category for use in zone 1 for use in zone 2 ...caused by gas, steam, fog EX atmosphere ...caused by dust...
- Page 8 max. surface Ignition tem- Temperature temperature of the perature of gas class operating material in °C °C >450 >300 <450 >200 <300 >135 <200 >100 <135 >85 <100 2.6.3 EX zone classification Areas that are prone to explosion are classified into zones. The owner must determine the zone that exists. Information on the zone classification can be found in IEC 60079-10 and in national standards.
- Page 9 Explosion hazards … recognizing and preventing! 2.6.4 5.52.624.01.01.00...
-
Page 10: Transport And Storage
Transport and Storage Transport The goods are checked and adequately packed before delivery. Do not throw or drop the accessories Use adequate means of transport Transport and means of transport must be suitable for the local conditions. Storage ... -
Page 11: Important Components
Important components Rope pulley with machined groove Maintenance-free roller bearing Side plates made of bended steel plate Rope slip off guard Technical data 108/22 rope pulley diameter capacity max. rope diameter weight outer Ø mm groove base Ø mm 1000 14,3 2000 32,4... -
Page 12: Tools
108/22 For rope exits at certain angles, individual rope slip off guard can be moved or removed. from 2000kg up to 1000kg To prevent the rope from slipping off when slack, the rope must be guided under at least one rope slip off guard. -
Page 13: Safety Check
Definition “qualified person” (former expert) A “qualified person” has learned, due to occupational training and experience and the job that the person has done, the skills needed to tests the material for one’s work. Definition “licensed qualified person” (former approved expert) A “licensed qualified person”... - Page 14 Trouble Please pay attention to the following in case of problems: Troubles with the equipment must only be repaired by qualified personnel. Secure the unit against unintended operation start. Put up a warning note indicating that the unit is not to be used. ...