Board Features; Electrostatic Warning - OLIMEX STM32-P107 User Manual

INTRODUCTION
STM32-P107 prototype board provides easy way for developing and prototyping with the new
STM32F107VCT6 connectivity line microcontroller, produced by STMicroelectronics. STM32-
P107 has JTAG port for programming and debugging, USB_OTG, user button, two status LEDs,
and most of the GPIOs are on extension headers where you can connect your additional circuits.

BOARD FEATURES

- CPU: STM32F107VCT6 32 bit ARM-based microcontroller with 256 KB Flash, 64 KB RAM,
USB OTG, Ethernet, 10 timers, 2 CANs, 2 ADCs, 14 communication interfaces
- JTAG connector with ARM 2x10 pin layout for programming/debugging
- USB_OTG connector
- USB_HOST connector
- 100Mbit Ethernet
- RS232
- Mini SD/MMC card connector
- UEXT connector
- Power jack
- Two user buttons
- RESET button and circuit
- Two status LEDs
- Power-on LED
- 3V battery connector
- Extension port connectors for many of microcontrollers pins
- PCB: FR-4, 1.5 mm (0,062"), soldermask, silkscreen component print
- Dimensions: 132.08x96.52mm (5.2x3.8")

ELECTROSTATIC WARNING

The STM32-P107 board is shipped in protective anti-static packaging. The board must not be
subject to high electrostatic potentials. General practice for working with static sensitive devices
should be applied when working with this board.
Page 3 of 19