Table of Contents
Advertisement
2
Self-Supervision Messages
The protection device supervises its normal operation by executing various self-supervision checks during runtime of the device.
If the Self-Supervision of the protection device has detected a (device-internal) error (as listed in
Error
Messages"), the system LED starts flashing alternating red and green, and a message is recorded in the internal memory.
Please check the self-supervision messages under [Operation / Self-Supervision / Messages].
Furthermore, the following messages are directly related to IT security:
SE
37,
SW
6,
SW
7,
These security-related messages can also be viewed at the menu path [Operation / Security / Security Logger].
E-Series Family Troubleshooting Guide)
SW
8,
SI
4,
SI
5,
SI
7,
SI
9,
SI
10.
www.eaton.com
2 Self-Supervision Messages
╚═▷ "2.1 Self-Supervision –
5
Advertisement
Table of Contents
