Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for BDI EILEEN 5166
Summary of Contents for BDI EILEEN 5166
- Page 1 EILEEN ™ 5166 SHELVING INSTRUCTION MANUAL LET’S GET STARTED. DESIGN MATTHEW WEATHERLY...
- Page 3 Congratulations on the purchase of your Eileen Shelf from BDI. Your shelf has been designed to provide a lifetime of enjoyment. This manual will provide assembly instructions and other helpful information to ensure you get the most out of your product.
- Page 4 HARDWARE AND COMPONENTS Unpack and identify the parts listed below. The assembly workspace should be a non-marring surface, such as carpet. For missing hardware pieces, please contact BDI Customer Service at customerservice@bdiusa.com. For all other concerns, please contact your BDI retailer.
- Page 5 STEP 1. INSTALL BOLTS AND DOWELS INTO PANELS ASSEMBLY Find the sets of 4 holes near the top and bottom NOT INCLUDED edges of the Side Panels (C1 & C2). Screw PHILLIPS 8 Cam Bolts (H1) into the threaded holes using SCREWDRIVER –...
- Page 6 NOTE: Look into the side of the Barrel Nuts (H3) and make sure the Set Screw (H4) is not blocking the hole. If the hole is blocked, unscrew the set screw a few turns until the hole is clear, which will allow the cam bolts to enter. Hardware Combination Hardware Orientation (H3) Barrel Slot Orientation 6 | BDIUSA.COM EILEEN 5166...
- Page 7 STEP 3. ATTACH TOP & BOTTOM PANELS TO SIDE PANELS ASSEMBLY Attach the Top and Bottom Panels (C3 & C4) to FLAT HEAD the Side Panels (C1 & C2) by sliding the dowels SCREWDRIVER – T2 and cam bolts into the edge of the holes on the Top and Bottom Panels.
- Page 8 Top Shelf (C9) (the smallest) goes into the top slot. Tighten the set screw at the back of Side Panels until snug. DO NOT OVERTIGHTEN, SCREW WILL STRIP. 8 | BDIUSA.COM EILEEN 5166...
- Page 9 STEP 5. LIFT SHELF AGAINST THE WALL ASSEMBLY Lift the shelving assembly up against the wall. The rear edge of all shelves (except bottom shelf) should be approximately 1/8” from the wall. NEED ASSISTANCE? customerservice@bdiusa.com | 9...
- Page 10 Drill a hole at this location for wall insert. At the marked location, install the appropriate Wall Anchor for your wall construction. Attach the Safety Strap (C10) to the wall using the Wood Screw (H5). SCREW – H5 17.25" 72.75" Safety Strap Detail Side View 10 | BDIUSA.COM EILEEN 5166...
-
Page 11: Care And Maintenance
While BDI’s stained wood finishes are stable in tone & appearance, all finishes are subject to some degree of discoloration with prolonged exposure to direct sunlight. Please avoid positioning your BDI cabinet in any area with ample direct sunlight. -
Page 12: Warranty
The decision to repair or replace will be at BDI’s sole discretion. BDI furniture is warranted for three (3) years from the date of purchase, as shown on your sales receipt. The warranty period starts from the date of purchase. This warranty extends only to the original purchasers who acquire new products from BDI Authorized Resellers.
Need help?
Do you have a question about the EILEEN 5166 and is the answer not in the manual?
Questions and answers