BDI CORRIDOR Assembly Instructions

CORRIDOR 5620
COMPACT BAR
Product Registration
Registering your new BDI product allows us to send you important
product updates, service information and helpful hints related to your
BDI products. Register today and you will be entered to win free a
BINK table from BDI. www.bdiusa.com/product-registration/
Placement and Maintenance
Corridor furniture is designed for indoor use on level floors. Clean
glass with glass cleaner, and steel parts and wood veneer with a
moist cloth.
Your Corridor furniture is engineered for easy assembly. Carefully
follow this procedure to prevent any damage.
Do not use power tools for assembly of this product.
Step 1
Unpack and identify the parts listed below. The assembly
workspace should be a non-marring surface such as carpet. For
missing hardware pieces, please contact BDI Customer Service at
customerservice@bdiusa.com. For all other concerns, please contact
your BDI retailer.
Designed by Matthew Weatherly.
These distinctive product configurations are protected by US and international patents, trade dress, and/or
copyright laws. Corridor & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2016, BDI
Made in China. 03.14.2016 V4
customerservice@bdiusa.com
D - Cabinet x 1
bdiusa.com
A Phillips Screwdriver x 1
B Hex Wrench x 1
C Leveler Wrench x 1
E Metal Leg, Right x 1
F Metal Leg, Left x 1
G 1/4-20 x 15 mm Screw
x 12
H Door Pull x 2
I M4 x 25 mm Screw x 4
J Rubber Bumper x 1
K Glass Top x 1
L M6 Screw (Silver)
x 4