Installing Drives - Supermicro SuperServer ARS-210ME-FNR User Manual

Installing Drives

Removing Drive Carriers from the Chassis
1. Push the release button on the drive carrier. This releases and extends the drive carrier
handle.
2. Use the handle to pull the carrier out of the chassis as shown below.
Caution: Except for short periods of time (swapping drives), do not operate the server with
the drive carriers removed from the bays, regardless of how many drives are installed, for
proper airflow.
Handle
Release Button
Chapter 3: Maintenance and Component Installation
Figure 3-4. Removing a Drive Carrier
42