E.3 Updating the Ampere SCP Firmware
The Ampere SCP firmware can be updated through the OpenBMC console. Ensure the system
running WinSCP is on the same network as the R12SPD-A motherboard before performing
these steps.
Updating the Ampere SCP Firmware through BMC Console
To update the Ampere SCP firmware through the BMC console, perform the following
steps on a Windows system:
1. Power off the system.
2. Launch WinSCP and enter the R12SPD-A login information into the Host name, User
name, and Password fields with the SFTP file protocol.
Appendix E: Updating Firmware through Redfish or OpenBMC Console
122