Updating Firmware With Sum In-Band - Supermicro SuperServer ARS-210ME-FNR User Manual

C.2 Updating Firmware with SUM in-band
1. With a console, enter the folder containing SUM and your firmware update package.
2. Run the command for checking BIOS, BMC, or SCP firmware version with SUM.
Note: Refer to the below commands for reference. Replace xxxxxxxxx with your username
and password.
./sum -I Redfish_HI -u xxxxxxxxx -p xxxxxxxxx -c getBIOSinfo
./sum -I Redfish_HI -u xxxxxxxxx -p xxxxxxxxx -c getBMCinfo
./sum -I Redfish_HI -u xxxxxxxxx -p xxxxxxxxx -c getSCPinfo
3. Run the command for updating BIOS, BMC, or SCP firmware with SUM.
Note: Refer to the below commands for reference. Replace xxxxxxxxx with your username
and password and yyyyyyyyy.tar with your BIOS, BMC, or SCP firmware .tar file.
./sum -I Redfish_HI -u xxxxxxxxx -p xxxxxxxxx -c updateBIOS --file yyyyyyyyy.tar --reboot
./sum -I Redfish_HI -u xxxxxxxxx -p xxxxxxxxx -c updateBMC --file yyyyyyyyy.tar --boot_check
./sum -I Redfish_HI -u xxxxxxxxx -p xxxxxxxxx -c updateSCP --file yyyyyyyyy.tar --reboot
4. Wait for the firmware update to finish.
Appendix C: Updating Firmware with Supermicro Update Manager
108