Installing The Processor - Supermicro SuperServer ARS-210ME-FNR User Manual

Installing the Processor

1. Use a screwdriver with a Torx T20 screw head bit to unscrew the socket force frame.
Unscrew counterclockwise in the sequence 5-4-3-2-1. The screws are numbered on the
socket force frame next to each screw hole.
Screw #2
Screw #4
Force Frame
2. The socket force frame will raise up after the last screw securing it (#1) is removed.
Gently allow it to lift up to its stopped position.
Chapter 3: Maintenance and Component Installation
Screw #1
Screw #3
32
Screw #5