Table of Contents
Advertisement
Time Electronics
7000 RTD Calibrator
6
Battery and Re-Charging
The 7000 is powered by a rechargeable NiMH battery pack that
hours operation.
To facilitate recharging of the internal batteries, the 7000 calibrator incorporates a low
voltage re-charger, this means that as well as the provided mains charger, any 12V DC
power source may be used, including a fuse (250mA) protected car battery.
Time for full battery charge:
•
Calibrator switched off = 16 hours.
Calibrator switched on = 21 hours.
•
Spare battery packs can be obtained from Time Electronics Ltd. Part #: 7629
Battery charger connector polarity
19
User Manual
gives approximately 24
Advertisement
Table of Contents
Need help?
Do you have a question about the 7000 and is the answer not in the manual?