Lexmark MX710 Quick Reference
Lexmark MX710 Quick Reference

Lexmark MX710 Quick Reference

Quick reference
Hide thumbs Also See for MX710:

Advertisement

Quick Reference

Learning about the printer

Using the printer control panel

1
9
Use the
To
1
Display
View the printer status and messages.
Set up and operate the printer.
2
Home button
Go to the home screen.
3
Sleep button
Enable Sleep mode or Hibernate mode.
Do the following to wake the printer from Sleep
mode:
Touch the screen or press any hard button.
Open a door or cover.
Send a print job from the computer.
Perform a power‑on reset (POR) with the
main power switch.
Attach a device to the USB port on the
printer.
4
Keypad
Enter numbers, letters, or symbols.
5
Start button
Start a job, depending on which mode is
selected.
6
Clear All /
Reset the default settings of a function, such as
Reset button
copying, faxing, or scanning.
7
Cancel button Cancel all printer activity.
8
Indicator light Check the status of the printer.
Use the
9
USB port

Understanding the home screen

When the printer is turned on, the display shows a basic screen,
referred to as the home screen. Touch the home screen buttons and
icons to initiate an action such as copying, faxing, or scanning; to open
2
3
the menu screen; or to respond to messages.
Note: Your home screen may vary depending on your home screen
customization settings, administrative setup, and active embedded
4
1
@ ! .
2
A B C
3
D E F
solutions.
4
G H I
5
J K L
6
M N O
7
8
9
P Q R S
T U V
W X Y Z
*
0
#
C
5
8
7 6
14
13
Touch
1
Change Language
2
Copy
3
Fax
4
E-mail
5
FTP
6
Arrows
7
Forms and
Favorites
To
Connect a flash drive to the printer.
Note: Only the front USB port supports flash
drives.
1
2
3
4
5
12 11
10
9
To
Launch the Change Language pop‑up
window that lets you change the primary
language of the printer.
Access the Copy menus and make copies.
Access the Fax menus and send fax.
Access the E-mail menus and send e‑mails.
Access the File Transfer Protocol (FTP)
menus and scan documents directly to an
FTP server.
Scroll up or down.
Quickly find and print frequently used
online forms.
1
Touch
To
8
Menu icon
Access the printer menus.
Note: The menus are available only when
the printer is in Ready state.
9
Bookmarks
Create, organize, and save a set of
bookmarks (URL) into a tree view of folders
and file links.
Note: The tree view supports only
bookmarks created from this function,
and not from any other application.
10
USB Drive
View, select, print, scan, or e‑mail photos
and documents from a flash drive.
Note: This icon appears only when you
return to the home screen while a
memory card or flash drive is connected
to the printer.
11
Held Jobs
Display all current held jobs.
12
Status/Supplies
6
13
Tips
Open a context-sensitive Help dialog.
7
14
Search held jobs
Search for one or more of the following
items:
8
Show a warning or error message
whenever the printer requires
intervention to continue processing.
Access the messages screen for more
information on the message, and how
to clear it.
User name for held or confidential print
jobs
Job names for held jobs, excluding
confidential print jobs
Profile names
Bookmark container or print job names
USB container or print job names for
supported file types

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MX710 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Lexmark MX710

  • Page 1: Quick Reference

    Use the Touch Quick Reference USB port Connect a flash drive to the printer. Menu icon Access the printer menus. Note: Only the front USB port supports flash Note: The menus are available only when drives. the printer is in Ready state. Learning about the printer Bookmarks Create, organize, and save a set of...
  • Page 2: Using The Touch-Screen Buttons

    Features Touch Reset Reset values on the screen. Feature Description Menu trail line A menu trail line is located at the top of each menu screen. This feature shows the path taken Example: to arrive at the current menu. Menus > Settings > Touch any of the underlined words to return to Copy Settings >...
  • Page 3: Customizing The Home Screen

    For Windows users Press Enter. Open the command window. Note: If you are using a proxy server, then temporarily disable it Scan to E‑mail Scan a document, and then send it to an e‑mail to load the Web page correctly. address.
  • Page 4: Setting Up Multi Send

    Setting up Multi Send Open a Web browser, and then type the printer IP address in the • Default number of copies—Specify the number of copies that address field. should automatically print when the application is used. • Default contrast setting—Specify a setting to increase or Note: View the printer IP address on the printer home screen.
  • Page 5: Exporting And Importing A Configuration

    Setting up Scan to Network screen, you can view the printer status, release held print jobs, create Notes: bookmarks, and do other print-related tasks you might normally do – Before importing the configuration file, you can while standing at the network printer. choose to preview it first or load it directly.
  • Page 6 Squeeze, and then slide the width guide to the correct position for > Paper Menu > Universal Setup > Units of Measure > select the size of the paper you are loading until it clicks into place. a unit of measure Touch Portrait Width or Portrait Height.
  • Page 7 Unlock the length guide, and then squeeze and slide the guide to One‑sided printing Two‑sided (duplex) printing the correct position for the size of the paper you are loading. • Do not slide the paper into the tray. Load paper as shown in the illustration.
  • Page 8: Loading The 2100-Sheet Tray

    • • Insert the tray. If you are loading envelopes, then make sure that the flap side Make sure the paper is below the maximum paper fill indicator. is facing up and the envelopes are on the left side of the tray. From the printer control panel, set the paper size and paper type in the Paper menu to match the paper loaded in the tray.
  • Page 9 Loading A5‑size paper Squeeze, and then slide the length guide to the position for A5 Insert the A5 length guide into its designated slot. until it clicks into place. Pull up and slide the width guide to the position for A5. Note: Press the A5 length guide until it clicks into place.
  • Page 10 If the A5 length guide is still attached to the length guide, then Squeeze, and then slide the length guide to the correct position Flex the sheets back and forth to loosen them, and then fan them. remove it from its place. If the A5 length guide is not attached, for the paper size you are loading.
  • Page 11: Loading The Multipurpose Feeder

    • Make sure the paper is below the maximum paper fill indicator. Pull the multipurpose feeder extender. From the printer control panel, set the paper size and paper type in the Paper menu to match the paper loaded in the tray. Note: Set the correct paper size and type to avoid paper jams and print quality problems.
  • Page 12 Note: Avoid touching the printable side of the Slide the width guide to the correct position for the size of the paper transparencies. Be careful not to scratch them. you are loading. • Flex the stack of envelopes back and forth to loosen them, and then fan them.
  • Page 13: Creating A Custom Name For A Paper Type

    • Click Settings > Paper Menu. Load envelopes with the flap side down and on the left of the multipurpose feeder. Change the paper size and type settings for the trays you are linking. • To link trays, make sure the paper size and type for the tray match that of the other tray.
  • Page 14: Printing From A Flash Drive

    Assigning a custom paper type Forms and Favorites > select the form from the list > enter the Click Settings > Print Settings > Quality Menu > Toner Darkness. number of copies > adjust other settings Adjust the toner darkness, and then click Submit. Using the Embedded Web Server Using the printer control panel Depending on your printer model, touch...
  • Page 15: Canceling A Print Job

    Notes: Canceling a print job from the computer • If you leave the flash drive in the printer after leaving the initial USB menu screen, then touch Held Jobs on the home • A flash drive icon appears on the printer home screen when screen to print files from the flash drive.
  • Page 16: Copying Photos

    Notes: • The ADF indicator light comes on when the paper is loaded Photo/Film > > Copy It properly. • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by If you are loading a document into the ADF tray, then adjust the Note: If you have more photos to copy, then place the next paper guides.
  • Page 17: Creating An E-Mail Shortcut Using The Printer Control Panel

    number, or use the address book. You can also use the Multi Send or Notes: Click Add. MyShortcut application from the printer home screen. For more • The Fax option is available for use only with the PostScript driver information, see the "Activating the home screen applications" section or the Universal Fax Driver.
  • Page 18: Creating A Fax Destination Shortcut Using The Printer Control Panel

    Creating shortcuts Note: If the name or number is incorrect, then touch Cancel, and If you are loading a document into the ADF tray, then adjust the then reenter the information. paper guides. From the home screen, navigate to: Creating a fax destination shortcut using the Scanning Embedded Web Server Fax >...
  • Page 19: Setting Up Scan To Computer

    Notes: Notes: Setting up Scan to Computer • Do not load postcards, photos, small items, transparencies, • View the printer IP address on the printer home screen. The Notes: photo paper, or thin media (such as magazine clippings) into IP address appears as four sets of numbers separated by the ADF tray.
  • Page 20: Understanding Jam Messages And Locations

    Scanning to a flash drive • • Do not remove a tray while the printer is printing. Do not use paper that has been cut or trimmed by hand. • • Do not load a tray while the printer is printing. Load it before Do not mix paper sizes, weights, or types in the same tray.
  • Page 21 [x]‑page jam, lift front cover to remove Area Area name Printer control What to do panel message cartridge. [200–201] Inside the [x]‑page jam, lift Open the front cover CAUTION—HOT SURFACE: The inside of the printer might be printer front cover to and the multipurpose remove feeder, then remove...
  • Page 22 Lift the green handle, and then pull out the toner cartridge from Insert the toner cartridge into the printer, and then push the green the printer. handle back into place. Pull the jammed paper gently to the right, and then remove it from the printer.
  • Page 23 [x]‑page jam, open upper and lower rear Close the multipurpose feeder door and the front cover. Pull down the rear door. door. [231–234] CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching.
  • Page 24 Close the rear door. Push the back of the standard tray. From the printer control panel, touch Done to clear the message and continue printing. [x]‑page jam, remove tray 1 to clear duplex. [235–239] Insert the standard tray. Pull out the tray completely. From the printer control panel, touch Done to clear the message and continue printing.
  • Page 25 [x]‑page jam, open tray [x]. [24x] Push down the front duplex flap, then firmly grasp the jammed paper, and then gently pull the paper to the right and out of the printer. Check which tray is indicated on the printer display, and then pull the tray.
  • Page 26 Slide the paper guide until it rests lightly against the edge of the Open the ADF cover. paper. Firmly grasp the jammed paper on each side, and then gently pull it out. Note: Make sure all paper fragments are removed. Close the ADF cover.
  • Page 27 If the jam is in the bottom ADF door or ADF exit bin, then open the bottom ADF door, and then firmly grasp the jammed paper on each side. Note: Make sure all paper fragments are removed. Close the bottom ADF door. Straighten the edges of the original documents, then load the documents into the ADF, and then adjust the paper guide.

This manual is also suitable for:

Mx711

Table of Contents