Lexmark MC3426i User Manual page 82

Use printer menus
Maintenance
Config Menu
Menu item
USB Configuration
USB PnP
1*
2
USB Configuration
USB Scan to Local
On*
Off
USB Configuration
USB Speed
Full
Auto*
Tray Configuration
Tray Linking
Automatic
Off*
Tray Configuration
Show Tray Insert Message
Off
Only for unknown sizes*
Always
Tray Configuration
A5 Loading
Short Edge
Long Edge*
Tray Configuration
Paper Prompts
Auto*
Manual Paper
Tray Configuration
Envelope Prompts
Auto*
Manual Envelope
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Change the USB driver mode of the printer to improve its
compatibility with a personal computer.
Set whether the USB device driver enumerates as a USB
Simple device (single interface) or as a USB Composite device
(multiple interfaces).
Set the USB port to run at full speed and disable its high‑speed
capabilities.
Set the printer to link the trays that have the same paper type
and paper size settings.
Note: This menu item is available only in some printer
models.
Display a message to select paper size and type after inserting
the tray.
Specify the page orientation when loading A5 paper size.
Set the paper source that the user fills when a prompt to load
paper appears.
Set the paper source that the user fills when a prompt to load
envelope appears.
82