Specifications - Crestron AudioExpander Operation Manual

Audio Expander
2 • Audio Expander: Adagio AAE

Specifications

Specifications for the Adagio AAE Audio Expander are listed in the following table.
Adagio AAE Audio Expander Specifications
SPECIFICATION
Audio
Controls
Volume Gain
Mute
Input Compensation
Bass Gain Range
Treble Gain Range
Frequency Response
S/N Ratio
THD+N
Stereo Separation
Power
Internal (consumption)
Available Cresnet Power
(output)
Heat Dissipation
8-ohm impedance
4-ohm impedance
Default NET ID
Operating Environment
Enclosure
Dimensions
NOTE: Cable connections can extend the overall depth of the AAE by
approximately two to three inches.
Crestron Adagio™ AAE
DETAILS
Volume, Balance, Bass, Treble, Loudness,
Mute, On/Off, Room On/Off, Source Select,
Mono/Stereo and Input Compensation
-80 to +20dB in 1dB steps
-100dB (electronic),
-120dB (amp output relay)
±10dB
±12dB @ 100Hz (2dB increments)
±12dB @ 10kHz (2dB increments)
20Hz to 20kHz ±0.75dB
100dB, 20 Hz to 20kHz A-weighted
0.05%, 20Hz to 20kHz
>75dB
7 Amps, 120 Volts AC @ 60Hz (AAE)
3.5 Amps, 230 Volts AC @ 50Hz (AAEI)
50 Watts (2.08 Amps @ 24 Volts DC)
700 BTU/hr
800 BTU/hr
31
41° to 104°F (5° to 40°C)
10% to 90% RH (non-condensing)
Black metal with molded ABS/PC front
panel; freestanding
Height: 5.64 in (14.33 cm)
Width: 17.16 in (43.59 cm)
Depth: 18.08 in (45.92 cm)
Weight: 36.6 lbs (16.2 kg)
Operations Guide – DOC. 6460A