Advertisement
Available languages
Available languages
TROUBLE CHECKS
The ZERO BALANCE switch
is pushed in.
The turntable does not
rotate by pressing the
MOTOR ON/OFF
button.
improper tonearm balance
adjustment.
The tonearm does not lower
or is not lifted up by press-
ing the V/V_ button.
The ZERO BALANCE switch
is pushed in.
Improper tonearm balance or
stylus force
Worn stylus
A record with shallow return
grooves being played by a
Auto return does net operate
at the end of play.
Loose connection of phono
cord
No audio from one channel
Steady low-pitched humming
sound
Loose attachment of the car-
tridge shell to the tonearm.
Ground wire is not connected
to the amplifier.
Improper stylus force
Groove skipping ; tonearm
skating ; tonearm not advan-
cing.
.
Turntable not level
Defective record
The turntable subjects to ex-
ternal vibration.
Loud rumble or low-
*
frequency howl
The turntable is placed too
near the speaker.
WHAT TO DO
Press the switch again.
Press the switch again.
front.
Apply more stylus force.
Connect the cord firmly.
Apply proper stylus force.
(See page 5.)
Advertisement
