Table of Contents
Advertisement
Lifting and lowering by turning the hand crank.
Lifting load – turn clockwise.
Hold load – release hand crank. The load holds
automatically. Acc. The different types, the crank
can removed in each position or the crank grip
can fold back.
Lowering load – turn anti clockwise.
Winches 1000 kg + 1500 kg
Free-wheeling mechanism of the drum
Disengaging of the rope drum
Turn the drum with the crank until the locking bolt (1) is
reachable with the hand.
Turn the drum per hand 2-3 mm in direction (A). Pull the
locking bolt (1) in direction (B) and turn it by max. 90°.
The free-wheeling mechanism is now activated.
Engaging the rope drum:
Turn the locking bolt (1) until it locks in the locking nut.
Turn the rope drum by hand until the locking bolt locks
totally in the drum.
CAUTION!
It is not permitted to disengage the drum under load.
8
Commissioning
8.1
General
The operator of the unit is responsible for the entire system.
According to the Ordinance on Industrial Safety and Health, a hazard analysis must be carried out by the
operator.
Observe the respective national standards, regulations and directives of the responsible bodies at the place
of operation.
NOTICE!
Hoists up to 1000 kg capacity and without motor-driven trolleys of hoisting unit must be tested by a
<qualified person= before putting into operation for the first time.
Hoists of 1000 kg capacity and up or with more than one motor-driven hoist movement; i.e. lifting and
trolley movement, must be tested by a <licensed qualified person= before putting in operation.
An exception is <hoists ready for operation= acc. validated national regulations with EU-declaration of
conformity.
Definition <qualified person= (former expert)
A <qualified person= has learned, due to occupational training and experience and the job that the person has
done, the skills needed to tests the material for one's work.
Definition <licensed qualified person= (former approved expert)
A <licensed qualified person= has, due through special occupational training, knowledge about testing of the
material for one's work and knows the national accident prevention regulations and other prescriptions and
technical regulations. This person must test the material for one's work regularly with regard to design and
kind of use. The license will be given to qualified person be the approved supervision authorities (ZÜS).
10
ö
õ
5.52.246.00.01.02
Advertisement
Table of Contents
