Yamaha TT-R125(R) 2002 Owner's Service Manual page 198

TIRE PRESSURE CHECK
NOTE:
Be sure to remove all dirt and mud from
G
around the locknut and adjuster before
adjustment.
The length of the spring (installed) changes
G
1.5 mm (0.06 in) per turn of the adjuster.
CAUTION:
Never attempt to turn the adjuster beyond
the maximum or minimum setting.
5. Tighten:
Locknut
G
6. Install:
Left side cover
G
EC36Q000
TIRE PRESSURE CHECK
1. Measure:
Tire pressure
G
Out of specification → Adjust.
Standard tire pressure:
NOTE:
Check the tire while it is cold.
G
Loose bead stoppers allow the tire to slip off
G
its position on the rim when the tire pressure
is low.
A tilted tire valve stem indicates that the tire
G
slips off its position on the rim.
If the tire valve stem is found tilted, the tire is
G
considered to be slipping off its position. Cor-
rect the tire position.
3 - 24
INSP
ADJ
42 Nm (4.2 m · kg, 30 ft · lb)
7 Nm (0.7 m · kg, 5.1 ft · lb)
100 kPa (1.00 kgf/cm
2
, 15 psi)