Pre-heating the oven
The
Booster
function is used to quickly
pre-heat the oven compartment in
some functions.
The
Pre-heat
function can be used with
any oven function (except
and has to be switched on separately
for each cooking programme.
If you have set a cooking duration, it will
only start to count down after the
heating-up phase.
It is only necessary to pre-heat the oven
in a few instances.
Most dishes can be placed in a cold
oven. They will then make use of the
heat produced during the heating-up
phase.
Pre-heat the oven for the following
preparations and oven functions:
- Dark bread dough and beef sirloin
joints and fillet with the
and
Moisture Plus
functions
Heat
- Cakes and pastries with a short
cooking duration (approx. 30 minutes
or less) as well as delicate items (e.g.
sponge) with the
function (without the
Heat
function)
Eco Fan Heat
,
Fan Plus
Conventional
Conventional
Booster
Booster
The
Booster
function is used to quickly
pre-heat the oven compartment in
some functions.
This function is switched on as the
factory default setting for the following
)
functions (
Other
Booster
|
On
):
-
Fan Plus
-
Conventional Heat
-
Auto Roast
-
Moisture Plus
If you set a temperature above 100 °C
and the
Booster
a rapid heating-up phase heats the
oven compartment to the set
temperature. The top heat/grill element
and the ring heating element come on
together with the hot air fan.
Delicate items (e.g. sponge or
biscuits) will brown too quickly on
the top if the
used.
Switch off the
these items.
Operation
|
|
Settings
function is switched on,
Booster
function is
function for
Booster
57