Table of Contents
Advertisement
Before using for the first time
Standard settings
The following settings must be made
before starting up for the first time. You
can change these settings again at a
later time (see "Settings").
Risk of injury caused by hot
surfaces.
The steam combination oven gets
hot during operation.
For safety reasons, this steam
combination oven must only be used
after it has been built in.
The steam combination oven will
switch on automatically when it is
connected to the electricity supply.
Setting the language
Select the language you want.
Confirm with OK.
If you have accidentally selected a
language that you don't understand,
proceed as described in "Settings –
Language ".
Setting the location
Select the required location.
Confirm with OK.
Setting up Miele@home
Set up "Miele@home"
display.
To set up Miele@home immediately,
select
Continue
32
appears in the
and confirm with OK.
To set it up at a later date, select
and confirm with OK.
See "Settings – Miele@home" for
information on setting up at a later
date.
To set up Miele@home immediately,
select the desired connection
method.
You will then be guided by the display
and the Miele App.
Setting the date
Set the year, then the month, and
finally the day.
Confirm with OK.
Setting the time of day
Set the time of day in hours and
minutes.
Confirm with OK.
Setting the water hardness level
Contact your local water supplier to
find out your local water hardness
range if necessary.
See the "Settings - Water hardness"
for more information.
Set the water hardness level for your
area.
Confirm with OK.
Completing the commissioning
process
Follow any further instructions in the
display.
The appliance is now ready for use.
Skip
Advertisement
Table of Contents
