Table of Contents
Advertisement
Operation
Switching Booster on or off for a
cooking programme
If you have selected the
setting, you can switch off the function
separately for a cooking programme.
On the other hand, you can also switch
on the function separately for a cooking
programme if you have selected the
Booster
|
Off
setting.
Example: You have selected a function
and the required settings such as the
temperature.
You want to switch off the
function for this cooking
Booster
programme.
Select the sensor.
Select
Booster
|
Confirm with OK.
The
Booster
function is switched off
during the heating-up phase. Only the
heating elements for the selected oven
function are used to pre-heat the oven
compartment.
58
|
Booster
On
Off
.
Pre-heat
It is only necessary to pre-heat the oven
in a few instances.
You can place most dishes in the cold
oven compartment to make use of the
heat produced during the heating-up
phase.
If you have set a cooking duration, it
will only start to count down when the
target temperature is reached and you
have placed the food in the oven.
Start the cooking programme immediately
without delaying the start time.
This function is not available with the
operating mode.
Steam cooking
Switching on the Pre-heat function
The
function has to be
Pre-heat
switched on separately for each
cooking programme.
Example: You have selected a function
and the required settings such as the
temperature.
You want to switch on the
function for this cooking programme.
heat
Select the sensor.
Select
Pre-heat
Confirm with OK.
The following message is displayed
with a time:
Place food in oven at
oven compartment is heated to the set
temperature.
As soon as you are prompted to do
so, place the food in the oven
compartment.
Confirm with OK.
Pre-
|
On
.
.... The
Advertisement
Table of Contents
