Table of Contents
Advertisement
3. Operation in the manual mode:
A. Press the Start key for 3 seconds, then the motor starts running with an initial speed of 0.5 KMH.
B. Press the speed +/ - key to adjust the speed.
C. Press the incline +/ - key to adjust the incline.
D. Press the speed shortcut key to quickly set the speed identified by the key.
E. Press the incline shortcut key to quickly set the incline to the lift marked by the key.
F. When the motor is running, press the stop key and the motor stops running.
G. When the set time decreases to zero, or when the set calorie decreases to zero, or when the set
distance decreases to zero, there will be a 3-beep sounds and the speed slowly decreases until
it stops. A longer 3 beep sounds will occur and the window will display End. 5 seconds later it will
revert back to standby, 2 beep sound will occur.
H. If parameters are not set in manual mode, the values will count up. Treadmill will stop after
exceeding 99:59 (100 minutes) in manual mode.
4. Fixed program mode:
1. The initial time is set to 30 minutes, and only the time can be set. The time setting range is from 5:00
to 99:00. Press the speed +/ - key, or Incline +/ - key to adjust the set value.
2. Press the start button to start the motor running, and the speed gradually increases to the speed
indicated in the first section of the automatic program (see the program value table for details).
3. Press the speed +/ - button to adjust the speed.
4. Press the incline +/ - keys to adjust the incline.
5. Press the speed shortcut key to quickly set the speed represented by the key.
6. Press the lifting shortcut key to quickly set the lifting represented by the key.
7. Each program is divided into 20 segments, with each segment running for 1/20 of the set time.
8. When switching between paragraphs, it will beep three times.
9. When the setting time decreases to zero, the speed slowly decreases until it stops. The buzzer emits a
short sound 3 beeps, and the speed will slowly decrease until it stops. The buzzer will emit a long sound
3 beeps, and the lattice window will display End. After 5 seconds, it will return to standby and the buzzer
emits a long sound of 2 beeps.
5. Fixed Program Data (Metric):
Speed represents speed, and incline represents slope (with a total of 55 slopes, each slope being 1/55 of
the total slope).
Each program divides the movement time into 20 equal parts, with corresponding speeds and slopes
for each time period.
PROGRAM
TIME
SPEED
P01
INCLINE
SPEED
P02
INCLINE
SPEED
P03
INCLINE
Setup time / 20 = each segment of the running time
1
2
3
4
5
6
2
2
2
2
3
3
0
1
1
1
1
2
3
3
3
3
4
0
1
2
3
4
5
2
2
2
3
3
3
0
2
2
4
4
4
7
8
9 10 11 12 13 14 15 16 17 18 19 20
3
3
4
4
4
1
2
2
2
2
3
4
5
5
5
4
4
5
4
2
1
4
4
4
4
5
6
6
6
7
7
4
5
5
5
5
5
3
3
2
2
3
2
4
5
5
5
4
4
2
3
2
1
1
2
5
6
6
6
5
5
8
8
8
8
6
6
OPERATIONS INSTRUCTIONS |
3
3
1
2
2
2
5
3
2
3
3
2
5
4
3
6
4
3
17
Advertisement
Table of Contents
