Table of Contents
Advertisement
Error
Possible reasons
E05
Over-current protection
Fault of motor's open
E06
circuit
E10
Transient current
protection
Test Method
Check whether the
controller match with the
standard of electric engine.
Check whether the
motor interface of the
drive is loose.
Check whether the
motor is open-circuited.
When the motor is
idling, if the current is
less than standard, it
will go wrong, please
install the machine and
test.
Check if the torsion of
controller is normal.
Check whether the motor
is short-circuited.
Check whether treadmill's
transmissional part is
stuck.
Solutions
Change the electric
machine or controller and
retest.
Re-plug the motor
interface properly.
Change the motor.
Adjust the torsion
regulator to normal value.
Change the motor.
Eliminate the disturbance,
and make sure the
treadmill goes smoothly.
OPERATIONS INSTRUCTIONS |
21
Advertisement
Table of Contents
