Table of Contents
Advertisement
STEP 5
1.
Lock all the Inner-hex bolts M10*20 (40) that are not locked.
2. Insert Tablet holder (26) into Computer frame (4), and then lock Tablet holder (26) to Computer
frame (4) by using Phillips screw M5*8 (57).
3. Lock Bottom frame protective cover (24L/R) on the Bottom frame (1) with Phillips tapping screw
ST4*16 (60).
4. Insert Front Handlebar end cap (17) onto Computer frame (4), and the insert Safety key (76) onto
Computer frame (4).
5. Plug one end of the power wire (82) into the treadmill and the other end into the power supply. When
not in use for a while, we recommend switching off from the power switch.
14
| ASSEMBLY INSTRUCTIONS
Advertisement
Table of Contents
