Operating
FTZ-I
V1
7 Operating
7.1 Operating for devices with automatic release
●
The device is connected to the lifting equipment.
●
Before lifting the device, the opening width have
to be adjusted.
●
The device is placed over the product, set down,
the device closes round the product and it can be
lifted.
Shut-down the device without lifting equipment/support frame only on even ground.
The gripping arms must be opened enough, to ensure a secure standing of the device.
Otherwise exists danger of overturning!
●
Set down on the ground again, the device opens
automatically, the automatic release locks it into
position so that the device can be lifted without
closing up.
●
Placed over the next product, the automatic
release disengages itself and the product can be
lifted.
●
The device therefore is a ONE-MAN-MACHINE.
12/01/10
15 / 20