General; Authorized Inset - probst FTZ-I Translation Of Original Operating Instructions

General

FTZ-I
V1
3 General

3.1 Authorized inset

● The device is only designed for the use specified in this documentation.
● Every other use is not authorized and is forbidden!
● All relevant safety regulations, especially regulations of the declaration of conformity, and
Prohibition
additional local health and safety regulations have to be observed.
The FTZ-I is universal usable for gripping and moving customary prefabricated concrete products, with clean
gripping surface; like steps, kerbs (also natural kerbs), as well as "Kassler Bord" (Bus- and Train-profil-
stones) and so on. Connected with lifting equipment e.g. a excavator or a crane.
The FTZ-I is universal usable because of the great opening width and a high carrying capacity.
Look at the technical data list for details.
This device is series-produced equipped with
the following elements:
● The opening range of the FTZ-I can be regulated universal over the spring bolt.
● The FTZ-I is equipped with a automatic release to switching full automatically from "full onto empty"
(grip and to loosen of the gripping goods). That means the opening and closing of the gripper be caused
through the set down and the heave of the device.
The use of this device is only permitted in proximity to the ground.
• universal adjustable opening range
• eyelet for the crane-hook
• automatic release
• exchangeable grip-elements (rubber metal-rail).
12/01/10
6 / 20