Table of Contents
Advertisement
Installation of Housing
Intended use
6
Installation
It is essential not to install the device under the following conditions:
• severe jolting or vibration
• permanent contact with water
• relative humidity of more than 90%
• sharply fluctuating temperatures (condensation)
• operation in an aggressive atmosphere (ammonia or sulphur fumes)
- risk of oxidation
• operation in the immediate vicinity of radio transmitters with high levels
of spurious radiation.
For fixing the housing please follow the instructions:
• Place the seal carefully in the groove. Ensure it is not twisted.
• Insert the housing from the front through the switchboard cut-out and
fasten using the screws provided.
• Carry out the electrical wiring and sensor connection in accordance
with the following description.
Drilling diagram
Advertisement
Table of Contents
Need help?
Do you have a question about the LE-200 and is the answer not in the manual?