Carel Easy Milk Chiller; Setting The Setpoint (Desired Temperature) - Liscarroll Engineering LE-200 Installation And Operating Instructions Manual

CAREL Easy Milk Chiller

Setting the Setpoint (desired temperature)

STEP ACTION
1 Press T1/T2 Button for more than 3 secs
Select T1
2 Press SET for 1s: current value will display
3 Press UP or DOWN to change the value
4 Press SET to confirm the new value
Accessing and Setting the Parameters Types F and C
1 Press SET for 3 s; "PS" will display (Password is requested)
2 - to access type F & C parameters enter the password "22" using UP/DOWN
- to access type F only, press SET (without entering the password)
3 Scroll inside the menu by using UP/DOWN
4 to display/set the values of the parameter displayed press SET,
then UP/DOWN and finally press SET to confirm the changes
5 to save all the new values and exit the parameter menu, press SET for 3 s:
to exit without saving the changed values do not press any button for at least 60 s;
Parameter Folders
/ PROBE
r CONTROL
c COMPRESSOR
A ALARM
P AGITATOR
H OTHER SETTINGS
Parameter Types
F Frequent
C Configuration
LE-200
35