Cleaning Program Description; Cleaning Cycle; Manual Stop Of The Cleaning - Liscarroll Engineering LE-200 Installation And Operating Instructions Manual

Cleaning Program Description

Cleaning cycle

A cleaning cycle consists of five different preset cleaning stages.
Main, ECO, Descale and Quick Wash parameters and times are all pre set with the
programs. Selecting the wash time will activate the pre set program steps
and times
The ECO wash is activated by selecting peracetic acid in the main wash's
final rinse (r5 = 1)
Automatic descale can be activated by turning on r7.
You can select the descale to be automatically turned on after 1-5 washes by
changing the r7 value to the wash that you want automated.
During the cleaning process the following can be is displayed.
(Setable in parameter [r97]: default '4').
0: Display of program step
1: Display of temperature
2: Display change between step and temperature
3: Display of remaining wash program time
4: Display changes between temperature and remaining wash program time
Start quick wash or descale wash
To start the wash program "quick wash" or "descale wash", press the respective
button for about 3 seconds. The program "main wash" starts directly when
pressing the button Cleaning
Manual stop of
Cleaning is manually stopped by the OFF-button:
the cleaning
• cleaning stops,
• the display alternately shows 'AbL' and the current temperature,
• for the time [n70] drain valve is opened (can be stopped by repeated
pressing of the Off-button).
• control switches into the OFF-mode.
LE-200
15