Safety - Liscarroll Engineering LE-200 Installation And Operating Instructions Manual

Safety

!
These operating instructions contain important technical and safety information.
Please read carefully before installation and before any work on or with the
regulator.
The universal tank control must be installed by an authorised specialist observing
local safety regulations.
Access to the environment when connected must be restricted to specialised
personnel.
The universal tank control contains live components and must not be opened up.
lt must not be used if the housing or connection terminals are damaged.
No fluids must penetrate the housing.
The universal tank control may not be exported to the USA without the
manufacturer's express permission.
Intended use
The universal tank control is ready for use once the parameters have been set.
lt should not be used before this has been done as this might result in damage to
the plant and the item to be cooled or heated.
The device is fitted with a resistance temperature sensor.
The device must not be installed in potentially explosive atmospheres.
The universal tank control type LE-200 fulfills the EC requirements for
electromagnetic compatibility (EMC) and the Low Voltage Directive (LVD).
The safety components meet the VDE regulations.
LE-200
5