Table of Contents
Advertisement
Operation
Button functions
Operating of Working Levels
Working level
for normal daily operation
General cooling parameters
Extended cooling parameters
Extended cleaning parameters
I/O test parameters
The working level is for normal daily milk-cooling operation. In cooling mode,
the current milk temperature as measured is permanently displayed.
To change to a different mode always press the 'OFF/SET' button first.
Active modes are closed down by pressing the 'OFF' button.
OFF / Set button
• Switch regulator to STANDBY
• Switch off continuous stirring
• Acknowledge error
• Switch to programming mode (press button for 3 seconds)
COOLING button
Press once
= T1 Start Cooling
Press twice
= T2 Deep Cool
AGITATOR button
in OFF mode = Continuous stirring
in COOLING mode (press 1 sec.) = Intermediate stirring SHORT
in COOLING mode (press 3 sec.) = Intermediate stirring LONG
See also section: 'Intermediate stirring options' .
WASHING button
in OFF mode = Start cleaning
During the cleaning process = Special function when Commissioning/Service
(See page 16)
CODE
Code: 212
Code: 345
Code: 567
Code: 0E5
LE-200
11
Advertisement
Table of Contents
Need help?
Do you have a question about the LE-200 and is the answer not in the manual?