C
S
ONFIGURING
OFTKEYS
To exit from the XML screen, press the XML softkey again or press the
4.
Flash Key
You can set a key to generate a flash event when it is pressed on the 6920. You do this by setting the
key to Flash. The IP phone generates flash events only when a call is connected and there is an active
RTP stream (for example, when the call is not on hold).
Configuring a Flash Key Using the Mitel Web UI
Click on Operation > Softkeys and XML.
1.
or
Click on Operation > Expansion Module <N>.
Softkeys
Select from Key 1 through Key 20 on the Top keys.
2.
or
Select from Key 1 through Key 18 on the Bottom keys.
In the Type field, select Flash.
3.
In the Label field, enter a label to display on the phone for the key.
4.
Expansion Module Keys
Select from Key 1 through Key 84(M695).
5.
In the Type field, select Flash.
6.
Click Save Settings.
7.
Sprecode Key
You can set a key to automatically activate specific services offered by the server by setting a key to Spre-
code. For example, if the sprecode value of *82 is configured, then by pressing the key, *82 automatically
activates a service provided by the server. The value you enter for this field is dependent on the services
provided by the server. Contact your System Administrator for information about available services.
F
K
LASH
EY
button.
84