Monitoring With Function Code 03 And 04; Table 21 Default Modbus Map Measured Values Of M10X-M - ABB M101 Manual

DE FAU LT DATA M AP

9.2.3. Monitoring with Function Code 03 and 04

Monitoring of the measured (analogue) values from the individual M10x-M is detailed in the
following table.
Modbus
Function
Code
3
3
3
3
3
3
:
3
3
3
3

Table 21 Default Modbus Map Measured Values of M10x-M

50
Modbus Device Modbus Register
Register Number Name
40001 1 Phase current L1
%
40002 1 Thermal image
40003 1 Time to trip
40004 1 Time to reset
40005 2 Phase current L1
%
40006 2 Thermal image
: : :
Phase current L1
40509 128
%
Thermal image
40510 128
Time to trip
40511 128
Time to reset
40512 128
Format Remarks
Unsigned Int, % age L1 Current
2Byte
Used thermal
Unsigned Int, 2
capacity (only
Byte
available if TOL
protection func-
tion is used)
Unsigned Int, Time before
2Byte M10x-M will trip
the motor (only
available if TOL
protection func-
tion is used)
Unsigned Int, Time required be-
2Byte fore reset allowed
(only available if
TOL protection
function is used)
Unsigned Int, % age L1 Current
2Byte
Unsigned Int, Used thermal
2Byte capacity
: :
Unsigned Int, % age L1 Current
2Byte
Unsigned Int, Used thermal
2Byte capacity
Unsigned Int, Time before
2Byte M10x-M will trip
the motor
Unsigned Int, Time required be-
2Byte fore reset allowed
1TG C 9 0 8 0 0 4 M 0 2 0 1
DATA M A P PI NG