Using the individual control
Manual command
Presentation
Safety note
When using the pre-programmed positions, (welcome, QE1, QE2, chair position,
couch position), do not leave the patient on the couch without supervision.
Adjusting the height
(up)
Adjusting the height by holding
the button down
Adjusting the seat angle
(up)
Adjusting the height by holding
the button down
Adjusting the backrest
angle
(up)
Adjusting the height by holding
the button down
Position QE1
This position can be completely
controlled by the user. At the
touch of a button (push)
«Emergency» position
The return to position is made by
1 sustained press
QE = Quick Exam
Safety note
When using the position memory function, movements can be interrupted by pushing
on one of the command buttons for the couch or, as a last resort, by disconnecting the
power supply cord.
18
LED
(save confirmation)
Adjusting the height
(down)
Adjusting the height by holding
the button down
Adjusting the seat angle
(down)
Adjusting the height by holding
the button down
Adjusting the backrest
angle
(down)
Adjusting the height by holding
the button down
Position QE2
This position can be completely
controlled by the user. At the
touch of a button (push)
Default position
Standard position for getting into
and out of the couch (H: 47cm)
at the touch of a button (push)
NB: This position cannot be
altered
User's Guide